EPOXY (*Single Application*) Repair Epoxy Required For Steel T-Bolt *Damaged Aluminum Pan Threads* (1/8 Inch = Single Application)

EPOXY FAST PERMANENT REPAIR DAMAGED ALUMINUM OIL PAN THREADS

INSTALLATION INSTRUCTIONS:

1. HAND INSTALL TAPERED STEEL T-BOLT INTO DAMAGED ALUMINUM OIL PAN THREADS

2. WITH 7/8" TOOL / SOCKET SLOWLY TAP & INSTALL TAPERED STEEL T-BOLT INTO DAMAGED PAN THREADS UNTIL SECURE / TIGHT (NOTE.. TAPERED STEEL T-BOLT THREADS MAY STILL BE EXPOSED WHEN INSTALL IS COMPLETE (THIS IS NORMAL)

3. REMOVE TAPERED THREAD STEEL T-BOLT THOROUGHLY CLEAN THREADS

4. KNEAD SINGLE APPLICATION EPOXY TO UNIFORM WHITE COLOR

5. APPLY EPOXY THOROUGHLY TO STEEL T-BOLT ON & AROUND THE DAMAGED THREAD AREA

6. REINSTALL STEEL T-BOLT SLOWLY, RE-TORQUE UNTIL TIGHT

7. COAT REMAINING EXPOSED STEEL T-BOLT THREADS WITH EXCESS EPOXY (RECOMMENDED CURE TIME 10MINS)

8. FILL WITH OIL / CHECK FOR LEAKS

9. IF LEAK IS PRESENT SLOWLY TAP & INSTALL TAPERED STEEL T-BOLT INTO PAN THREADS, UNTIL LEAK STOPS

11. INSTALL VINYL CAP TO COMPLETE INSTALLATION -

*TO AVOID DAMAGE TO ALUMINUM PAN, DO NOT OVER TIGHTEN TAPERED STEEL T-BOLT.

------------------------------------------------------------------------