Small DuPont 6 Fin Rubber Sleeve - Centers Self Adjusts & Locks Eco-Plug Into (10mm x 14mm Diameter) Oil Pan Threads

THE DuPont 6 FIN SELF ADJUSTING RUBBER SLEEVE IS INSTALLED ON THE ECO-PLUG STEEL SHAFT TO CENTER & PROVIDE A MECHANICAL LOCK WITHIN (10MM X 14MM DIAMETER) STEEL MOTOR OIL PAN THREADS

----------------------------------------------------------------------

INSTALLING DuPont 6 FIN RUBBER SLEEVE ONTO ECO-PLUG STEEL SHAFT:

1. INSTALL DuPont LEAK PROOF GASKET ON ECO-PLUG

2. PLACE ECO-PLUG ON FLAT SURFACE

3. LUBRICATE ECO-PLUG STEEL SHAFT

4. STRETCH SLEEVE (SMALL HOLE FIRST) AROUND THE ECO-PLUG STEEL SHAFT

5. FIRMLY PUSH OR GENTLY TAP SLEEVE DOWN LUBRICATED SHAFT UNTIL SLEEVE LOCKS & IS SEATED ON GASKET

----------------------------------------------------------------------

REMOVING DuPont 6 FIN RUBBER SLEEVE ONTO ECO-PLUG STEEL SHAFT:

1. PLACE ECO-PLUG ON FLAT SURFACE

2. WITH FLAT HEAD SCREW DRIVER USING OUTER ECO-LUG STEEL EDGE, SLOWLY PRY AND ROTATE SLEEVE UPWARD FROM SLEEVE BASE TO RELEASE LOCK

(WARNING DO NOT PRY FROM GASKET)

3. PULL RUBBER SLEEVE OFF OF ECO-PLUG STEEL SHAFT

4. INSPECT GASKET REPLACE IF DAMAGED